Steam cleaning your carpets at least every year, is as important as having your car serviced.
All of us service our vehicles every year, or every 10,000 kilometers… whatever occurs first (well this is the time we all need to be planning to do!)
What is the reason we do this?
To prolong the life of your engine and increase the security of your car, avoid wear and make sure it’s running efficiently. In essence, we take care of our vehicles to keep them running smoothly. them.
Similar is true about your carpets.
I’d like to ask this question: have you had the opportunity to recently have your carpets at work professionally steam-clean?
You might be doing so for some reasons.
You might not know what the term “steam cleaning” means?
Maybe you’re thinking that it’s a waste of money?
However, the truth is that carpet steam cleaning does not fall under any of the mentioned. Steam cleaning for carpets is essential and simple with a professional company handling it. It is a must-have part of your cleaning schedule.
What exactly is steam cleaning and how does it function? What exactly is it and what exactly is the procedure?
There are some crucial questions you should ask We understand the necessity of knowing what the steam cleaning process is carried out. With more than 27 years of expertise in the cleaning industry for commercial establishments We’ll be passing the knowledge we have gained about this subject for you to ensure that that you be aware of the specifics.
What exactly is carpet steam cleaning? How do you use it?
Before we go into the specifics of how carpets should be properly cleaned with steam it is important to be sure that we’re on right track in terms of what actually steam cleaning is.
There are certainly a variety of ways to clean your carpet like dry cleaning, or shampooing. However, In-Tec In-Tec We generally prefer using our steam-cleaning method also known in the industry as hot-water extraction. This isn’t to say that we don’t occasionally employ different ways (dry washing, shampooing or utilizing a walk-behind device). However, steam cleaning is the method that works the best in all situations (and it is also able to give the most effective results).
Carpet steam cleaning involves the act of pressingurizing hot water to get deep into the carpet fibers to aid in softening and loosening dirt, dust staining, skin cells and, most importantly, eliminate bacteria, germs, and various viruses. It also improves the appearance and extends the lifespan of your carpet. No need to worry about replacing your carpet before it’s aged and worn!
What is the process for carpet steam cleaning? perform?
When steam is pushed into the carpet, the tiny molecules of steam agitate the pores, causing these molecules to increase in size swiftly and effectively to eliminate everything rotten within the fibers.
I’m not going in too much detail since the next section will go through the entire steam cleaning process.
Let’s see the way it works!
How do you steam clean carpets? [the 6-step process]
How do the staff from In-Tec Commercial Cleaning steam clean carpet?
We are sure that this will be among the most important concerns that are circulating in your head So let’s walk through everything from beginning to the very end.
Take a moment to listen because even though some of the components may be technical, we’ve tried everything we can to simplify the process of steam cleaning simple for anyone to comprehend.
1. Do a risk assessment
From the beginning, our team of cleaners will complete an assessment of risk and familiarize them with the area immediately upon entering your workplace. This includes ensuring that all evacuation routes, the fire extinguishers and water supply, power source and bathrooms, etc. Are within the building.
They’re performing all the necessary tasks behind the scenes to prepare them for their job.
What is the reason this should be done?
If something were to happen, the cleaners will know which places of the property are.
You might also be wondering why the cleaners have to be familiar with the website? Are they team members different from my regular cleaning staff?
The answer is simple. The staff members we employ to steam clean your carpets are specially equipped to handle this job which is why they differ from the normal cleaning service. If you’ve ever had your cleaning company conduct a spot-cleaning and you’ve observed that the task was not done correctly or that some damage was caused to the carpet or perhaps you’ve had your request rescinded.
Steam cleaning carpet requires expertise and experience. A trained cleaner is the best person to do this task.
2. Make sure the machine is ready
It is impossible to complete an assignment without the right equipment.
You must have everything ready for use. Without going into unnecessary information, the basic equipment required is:
- Vacuum cleaner that has a powerhead that is attached
- Machine for extracting hot water (we employ the Steamvac) with the wand big and hand-held.
- The hot water unit inline (to to heat the water)
- Pre- spray unit
- Hoses that allow the machine to be connected to the wand, the pre-spray unit to fill and empty the machine
- Agitators to spot stain spots
- and of course all the chemicals required to accomplish the task at hand.
First step involves preparing for the extraction unit that is hot as well as the pre-spray unit. This is done by filling the carpet unit with water (side note: the tank we have is around 80 L) and then filling the pre-sprayer with chemical used to prepare the spray and dilute it as needed.
Did you observe that we didn’t mention that the water has to be heated? Did you notice that we didn’t mention placing chemicals into the tank?
The most important reasons for both of them are:
Chemical usage – determining the proper dilution amount of chemical in the machine isn’t easy. As you’ll discover, is not what you want. to see is chemicals left on the carpet.
Filling up the appliance with warm water will not work as well since this hot liquid cools rapidly. However, if you utilize an inline heater that is hot, the water that is at the source (the carpet that is being cleaned immediately) will always be in the proper temperature.
3. Pre-vacuuming of carpets
Before the process of hot water extraction begins, our cleaners will need to clean the carpet before they begin to ensure all surface dirt is cleared. In doing so they’re also removing any visible debris off the floor, including pencils, paper clips and cardboard and so on. Anything that might interfere with doing their job.
What is the significance of a pre-vacuum?
There are three reasons.
- Therefore, dirt isn’t stuck into the carpet any further as the machine runs over it.
- Getting rid of as many dirt particles as is possible prior to the extraction process.
- This will ultimately assist in delivering better results
To make it clearer, imagine you are trying to clean your vehicle while not washing it. It’s not logical to perform one task without ensuring that the first procedure has been completed.
As a bonus it keeps our equipment clean and less prone to being damaged.
There’s a second important task the cleaners are doing while cleaning prior to vacuuming. They check for spots on the carpet like pet urine or coffee spills from pets in the office (trust me when I say this occurs more frequently than you imagine!). This is to ensure that the carpet is prepared for the next step of the process of steam cleaning a rug in Sydney.
4. Treating the stain and spraying it
We’ve checked for carpet stains and made notes of where they’re located.
Now is the moment to spray stain using the proper chemical for spotting. In In-Tec We typically use two chemicals that are specifically designed for this purpose.
The first one is known as grease release, and it’s used to be used for everything including chewing gum staining, to oil stains. The other is known as coffee break. It’s utilized for…you know what coffee staining! This is the most common kind of stain we see.
In the case of things like urine staining and blood staining, there are different chemicals that we employ for these. To avoid getting too technical, we’ll keep to the most common kinds of stains, without getting into the specifics.
You might be wondering, what’s the reason for spraying stain removal?
It’s simple. It aids in the removal of stains before water extraction.
As a matter of fact the majority of stains require agitation using the appropriate hand-held brush. This will help the chemical in getting into the affected area, and aid in the removal of the stain at the end of the process.
5. Carpets should be pre-sprayed with the chemical cleaner
We’re nearing the end phase and this is where the most exciting part in the process of steam-cleaning your carpet takes place (or at the very least, where we’re excited – when the carpet is getting clean and ready for the next stage).
The carpet is pre-sprayed the chemical chosen for cleaning typically an emulsifier that is not solvent for the removal of general dirt and dirt and is suitable to all carpets.
There’s only one proper method of pre-spraying carpets and that is to ensure that the chemical doesn’t dry until it’s extracted. But that doesn’t mean you have to remove it immediately! The chemical needs time to penetrate the carpet to activate, soften and lift dirt up so to be removed effortlessly.
Simply put the amount that it is soaked within, however not so much that it’s dry or very wet.
To achieve this, our carpet cleaners first pre-spray in the extent they can comfortably without the pre-spray chemical drying out (which typically amounts to 100 square meters of carpet). After pre-spraying the initial 100 sqm, they remove the section. The procedure is repeated till the whole area is finished.
We’ll get into the details of how to remove the carpet within the following step.
To be clear the reason why just 100 square metres are being worked on at a time is due to dry time for the chemicals depends on the ambient temperature and humidity. Like we said, the chemical must be soaked the right way, but not sufficiently to completely dry.
What is the reason you split carpet steam cleaning into segments?
We’ve previously mentioned one reason to break the process into smaller sections to ensure that the carpet doesn’t dry.
There are other possible reasons?
Yes, there’s an important factor!
It allows the cleaner an opportunity to assess how the entire process is going. It lets us see how the first part of the area is drying out and whether there is any additional actions required.
6. Hot extraction of water
The last step – it’s time to rid yourself of the nasty and disgusting items that have been laying around your carpet!
We’re about to become a bit technical Please be patient with us.
Hot water extraction involves pressurised water that is dispersed by a commercial grade machine. To put it simply the concept, it’s basically an edgier version of your regular pressure cleaner that is bigger and more robust, and like we said that the cleaner must be properly trained to operate the machine.
What is the mechanism that makes the machine perform?
This extraction method and the machine could be divided into two components:
- the wand that is used to apply the hot water at pressure the wand used to apply pressure to the hot water
- The machine that eliminates (sucks into) the excess water.
This stainless-steel wand comes with at least 3 or 2 jets that spray the water on the carpet to loosen and eliminate dirt, as well as eliminating all bacteria. The force of the extractor (water that is released from the jets) must be in the range of 350-450 psi in order to get the best outcomes (sounds like a number that sounds high however it’s actually necessary).
When the jets are finished spraying water on your carpet, then the that houses the powerful vacuums (yes there’s more than one, sometimes two, but sometimes three) is then able to suctioning up the loose dirt and debris, and also any water left behind from your carpet. It is essential that the vacuum removes any water that is left behind to stop any unpleasant smells developing. Do you remember that damp, wet musty odor? This remedy will eliminate the smell.
I’d like you to consider and clarify two points that were previously mentioned in this article.
First of all, it was stated earlier that no chemical was in the water inside extractors. Yes, it’s difficult to accurately measure the chemical in this case. But, the main reason is the desire to ensure that there is no chemical residues in the carpet.
Do you know if you ever witnessed carpets get dirty fast after being cleaned?
Most of the time, this occurs because of the chemical residue that leads to dirt adhering onto the compound.
Additionally, the water has to be heated to the ideal temperature by using an inline heating. It is important to note that temperature depend on the kind of carpet that is being cleaned. Getting too hot water can cause damage to carpet, while too cold could result in a shoddy cleaning.
Do you have the ability to walk on carpet immediately after having it steam cleaned?
While this may be an ambiguous answer, it does depend on the circumstances.
In the average, it takes about two hours before someone is able or ought to walk on the carpet that has been freshly steam-steamed. If the carpets are steam cleaned for customers most of the time, we do the cleaning during working hours. This gives the carpet for it to fully dry prior to when employees start their work the next day. It’s also crucial that air conditioning is on so that the carpet can dry faster, thereby avoiding damp odors.
What can you tell if you’re dry?
Typically, you will be able to discern when the carpet is drying because the wet patches begin fade, and the carpet is restored to its usual color. After that, you’re free to go wherever you want!
What are the benefits of steam cleaning for carpets?
After having delved into a lengthy discussion of the meaning of carpet steam cleaning and how it operates and how it works, we’re not yet talking about another important point.
Why do you require carpet cleaning?
There are a myriad of benefits of having your carpets professionally steam every year. Let’s take a look.
- Your carpet will be clean and clean – no any more dirt, dust and germs laying on the floor
- Removes the staining that has been causing problems for the employees and you
- Increases the life of your carpet
- It guarantees a thorough and effective clean. The combination of hot water and chemicals provides the most effective cleaning results
- Allergy sufferers will notice that a carpet has been cleaned with steam. There is no longer a chance of having a runny nose due to dust mites
Are you still pondering whether you should have an annual (if there isn’t more) cleaning of carpets on your property?
Do you want carpet that is dirty and has dirt, stains, soil and dust everywhere?
or a fresh and clean carpet that appears as fresh as it was when it was new?
I’m sure which one I’d choose I’m sure you’ll agree with me! (Hint: It’s the second one).
The reason why you should have your carpet steam-cleaning
Your carpet acts as an enormous filter that is constantly taking in dirt and capturing dust, germs and allergens.
Also your carpet acts as an entry point for all sorts of unpleasant substances.
It’s likely that you didn’t realize that carpets can support at least four times more weight than they do in soil. Gross, right?
If you’re believing that you can rewind the clock by grabbing the vacuum, think twice. Sure, cleaning your carpet every day or weekly is crucial however, you must seek out an experienced cleaning company that can do steam cleaning of your carpet on a regular basis.
