The Seller
How can a seller prepare for an inspection of their home? What is the job of a Home Inspector in Fulshear, TX? perform? The inspector at your home will test every part of your home. The Home Inspector will use his knowledge gained from hundreds of inspections to provide eight tips for preparing your home for inspection.
1. Check that the power is in operation. In order to conduct a thorough inspection, all utilities must be switched on. If water, gas or electricity is not on the inspector will not be able to carry out the inspection.
2. When you own pets,, be sure they are removed. A door sign that reads “Don’t let the cat out” isn’t enough. Once an inspector starts, the process, he’ll probably be in and out of the home several times, and they aren’t even considering pets. If you have a pet do not just put it in your backyard. Even if your dog appears “friendly” you risk it getting away as the home inspector unlocks the gate. In some instances “friendly” dogs will go after the intruder (the home inspector) in the backyard. If the inspector is frightened by a dog, he may not be able to finish the inspection, and could be required to return later.
3. Check that the inspector is able to get inside the attic. If the attic entrance is a pull-down, ensure that there is nothing underneath it. A lot of the time, boxes, furniture, lawnmowers or other objects are blocking the way. The attic is among the most important places for inspectors to examine. The insulation, framing, and ventilation are all areas that the inspector should inspect. Attics can also contain HVAC, water heaters as well as electrical equipment. If the pull-down is located inside the home, be sure that chairs, tables or boxes are not blocking the access.
4. Be sure that an inspector has access to the panel. If it’s hidden behind a photo, write the image down. In the event that panels can be found located in an unclean space or otherwise unusual put an entry in the kitchen that includes details. In the event that it is located in garage, ensure that the inspector is able to access the panel, and also that the panel isn’t obstructed by storage items.
5. In the event that your water heater has been hidden in a cupboard, write a note to the inspector with specifics. In the event that your water heater has been blocked by objects, removed to allow the inspector to examine it. The inspector at the home should have access to the heater.
6. If your lights, fans, or fireplaces require an operating remote be sure that the remote is readily available for inspection. If you have multiple remotes, put notes on them so that the inspector knows which one to utilize. Check that your remotes are equipped with good batteries.
7. In the event that storage rooms or crawlspaces are locked, open them so that the inspector is able to gain access to the area. Be sure that crawlspaces and storage room doors aren’t restricted by boxes, etc. If you do everything you can to ease the process for the inspector, they is able to complete the inspection in a short time and not need to come back.
8. In the event that your thermostat was secured by pins, unlock it to allow the inspector to inspect the HVAC system.
9. In the end, the seller should quit the property so that the inspector doesn’t get distracted. This will allow for the most thorough possible inspection.
