What Are Some Of The Major Causes Of Dampness Inside Homes?

One of the significant aspects that you, as a homeowner, need to keep in mind while taking care of your new house is the overall dampness that has been inflicted on it. If you neglect the moisture inside the home, then it can negatively impact the structure as well as create unhygienic conditions, especially for its occupants.

However, if you want to get to the bottom of the problems, you must know the causes first – which is the reason why we are here to help you. Therefore, in this article, we are going to share some major causes that lead to dampness inside homes – with the help of kitchen renovation in Massachusetts services.

The Significant Causes Of Dampness Inside Homes

  • Due To Capillary Action

It should be realised that in case the groundwater table is high around the area where the house has been constructed, then it can easily affect the foundation of the house. This is because the building materials that have been used in the foundation of the house will absorb all the water and thereby get damped. 

Such a process is known as capillary action and is highly dangerous in the long-run because it weakens the foundation of the home. 

  • Material That Has Been Used Is Of Poor Quality

Dampness can also be caused due to the use of inadequate or low-quality materials as they are not that resilient towards water damage. As a result, your home will get damaged due to water absorption over time and that too within a very short period.

  • Roof Slope Not Adequate

You must remember that rainwater can easily seep through the roof of your home and especially if your roof doesn’t have adequate slope – then your house will absorb most of the water. Ultimately, you’ll have to deal with dampness, which can also give rise to the growth of moulds & mildews. 

  • Plumbing Not Done Correctly

If the plumbing system inside the house is not done in a correct manner, then it can easily lead to multiple wet areas around the house. The positively affected areas will be the kitchen and bathroom where the use of water is highly practised throughout. 

The only way to resolve such an obstacle would be to replace or repair the plumbing fittings so that there’s no source of dampness inside the home. 

  • Clogged Or Leaking Pipes

This is in relation to the above-mentioned point – if the piping system inside the home is not installed correctly, then water will not be able to pass. As a result, the water will get clogged in certain parts of the piping system, leading to leaks and ultimately dampness. Therefore, the piping system must be maintained regularly. 

Leave a Reply